What types of payment methods & financing do you offer?
We offer a variety of payment methods and financing options depending on the promotional period. Please visit our financing page for more information regarding available options.
Will the replacement windows be installed from the inside or outside?
The majority of our replacement windows are installed from the outside. In some situations it may be necessary to install from the inside. On the day of installation, your installation expert will assess your unique situation and explain the process that will best suit your home.
Do you install replacement windows year-round? If so, will I lose a lot of heat/cooling at the time of installation?
All American Exteriors installs replacement windows year-round. An average installation will take only one day. Our crews install one window at a time and are trained to do what they can to minimize heating/cooling loss. The energy savings from your new windows will recover any incremental energy costs incurred during their installation many times over during their lifetime.
How can I prepare my house for my replacement windows?
Please take down curtains, blinds, or any other window treatments. Security sensors should also be removed and turned off by your security company. Please provide our installation expert with a clear path to the window(s) being replaced by moving anything that may be in the way. It is also advisable to remove all wall decorations from the walls close to the windows as they may fall during removal or installation.
How long will it take to get my replacement windows? How much time should I allow for the installation?
Your replacement windows will be installed within 4-8 weeks from the date that the final measurements are taken. The type of window being installed and type being removed help determine the amount of time needed to complete the job. On average each window takes less than 1 hour. Trim work and cleanup will require additional time to complete. An average job will take a single day.
What type of warranty is available for my windows?
Most All American Exteriors replacement windows come with a limited lifetime warranty for residential properties. Contact us for more details.
What happens to my old windows?
After installing your new replacement windows we remove all old windows from your property and dispose of them properly. If you wish to keep your old windows or storm windows, please notify the installation crew as soon as it arrives for your installation.
I'm overwhelmed by all the industry jargon. What do these words mean?
At All American Exteriors, it's our goal for each and every one of our customers to feel comfortable throughout their home improvement experience. We try to always explain any construction concepts in terms everyone will know when we're in the home, but we also like to make definitions available in advance. If there are any concepts you'd like to read up on as you research your options, feel free to review our Terms and Definitions by clicking on the link at the top of this page.
American Architectural Manufacturers Association. A national trade association that establishes voluntary standards for the window, door, and skylight industry.
the outdoor temperature.
a colorless, harmless gas used instead of air in sealed spaces between panes of glass in insulating glass units to increase insulation. Argon is less conductive to heat than air.
a vertical member placed at the meeting edges of a double door to provide a weather seal and may be used to anchor the fixed door
a type of window with a top-hinged sash that swings out at the bottom - lets in fresh air while keeping rain out.
a mechanical device mounted in the window frame used in vertically operating windows as a means of counter-balancing the weight of the sash during opening and closing. A minimum of two balances per sash is required for all types of balances.
a type of window consisting of a central picture window flanked by a pair of narrow casement windows set at an angle - provides a panoramic view.
a type of window very similar to a Bay, except that the panels (3 or more) are equal sized. Panels can be fixed or operable or mixed in any combination.
the bottom horizontal member of a window sash or door panel.
a type of external casing for windows and doors.
a synthetic rubber used as a sealant and architectural glazing type.
a type of window with a side-hinged sash that opens like a door - the best option for catching a breeze and cross-ventilation. Sashes are operated by a handle.
a compound for filling joints and sealing cracks to prevent leakage of water and air.
when water vapor, which is present in all but the driest air, comes into contact with a surface that is below what is called the “dew point temperature,” the vapor becomes liquid and is called condensation. Moisture appears on the colder surface.
process of heat transfer through a material from a warm surface to a cool surface.
Design Pressure (DP)
the pressure a product is designed to withstand. Used in the context of regulating appropriate window strength for hurricane or other areas.
the temperature at which the condensation of water vapor in a space begins, at a given state of humidity and pressure, as the temperature is reduced.
an area that protrudes from the roof of a house, generally featuring one or more windows.
a type of window that has an upper (outside) sash that slides down, and a lower (inside) sash that slides up.
two panes of glass with a single airspace, held together by an edge spacer - the most economical interglass unit.
a window providing egress (the ability to leave an enclosed space. The minimum egress dimensions required by most building codes are 20" horizontally and 24" vertically.
the removable glazing bead that holds the glass or panel in place when it is on the exterior side of the lite or panel, as contrasted to an interior stop located on the interior side of the glass.
the process of producing aluminum shapes by forcing heated metal through an orifice in a die by means of a pressure ram. Also, any item made by this process.
a stationary window or door that does not open - also referred to as a fixed sash.
a flange can be a front-mounted fin on a window or dorwal. This facilitates its use in installation of stucco and replacement installation.
the head, jambs and sill that form an opening into which a sash or door panel fits.
hinged glass doors consist of one or more glazed panels contained within an overall frame designed so that one or more of the glazed panels are operable. The operable glazed panels swing either to the inside or to the outside.
units which consist of three-dimensional, five-sided structure, with provisions made for supporting plants and flowers in the enclosed space outside the plane of the wall. Operating sash are allowed but not required.
decorative inserts for windows or door glazing that add a traditional touch - available in a variety of colors and styles.
a device on which doors, windows, cabinets, etc. may turn or swing to open and close.
similar to casement window except the sash is hinged at the bottom. Hopper windows are projected windows having one or more sash hinged or pivoted at the bottom edge and projecting inward from the plane of the window at the top.
Horizontal Sliding Window
a window where the movable panels slide horizontally. products which have been tested to extra wind loads and water resistance test pressures enabling products to be used in installations which are subjected to environmental conditions which exceed the performance levels of a standard rated product.
High Performance (HP)
the movement of outdoor air into the interior of a building through cracks around windows and doors or in walls, roofs and floors.
insulating glass refers to two or more pieces of glass spaced apart and hermetically sealed to form a single glazed unit with an air space between. Heat transmission through this type of glass may be as low as half that without such an air space.
Insulated Glass Unit (IGU)
a combination of two or more panes of glass sealed air space(s) between panes. Also referred to as thermopanes or sealed units.
construction materials used for the protection from sound, heat, cold, or fire. A material with high resistance (high R-value or low U-value) that is used to retard heat flow. Air, Argon, or Krypton gas spaces between panes of glass provide insulation in IGUs.
a set of meeting rails or meeting stiles which contains a provision for each of rails or stiles to physically engage one another over their entire length.
main vertical members forming the sides of a window or door frame
width of a window or door from the interior to the exterior of the frame
usually an aluminum roll form channel used to trim off aluminum siding to the vertical potion of doors and windows, the “J” channel is fitted next to the window or door jamb and allows the aluminum siding material to finish off in the channel.
an inert, colorless gas used instead of air in sealed spaces between panes of glass in insulating glass units to increase insulation. Provides greater insulation than Argon.
a rail in a vertical window provided with an operator to raise or lower the operable sash.
one piece of glazing, another term for a pane of glass used in a window
the device on a window or door that secures it in a closed position
a slatted opening for ventilation in which the slats are so placed to exclude rain, sunlight, or vision.
Low E Glass
low-emissivity glass with a transparent coating which acts as a thermal mirror - used to increase a window's insulating value, block or increase heat flow, and reduce fading
a rail which overlaps another rail. The part of a sliding glass door, a sliding window, or a hung window where two panels meet and create a weather barrier.
an intermediate connecting member used as a means to 'join' two or more fenestration products together in a single rough opening. A mullion may or may not give added strength for structural stability.
National Fenestration Rating Council. A body that has established methods for rating and certifying the energy performance of windows, doors, skylights, and other fenestration products.
mainly used for decoration, diffusion, or privacy. The design is pressed into the glass during the rolling process
describing a sash ventilator or panel to be opened and closed
a framed sheet of glass.
consists of one or more lites of glass contained in panels, which, in turn, are contained within an overall frame designed so that one or more panels are movable in a horizontal direction. Also referred to as Sliding Glass door.
a horizontal surrounding edge member of a sash, ventilator, or panel.
the opening in a wall into which a door, window, or rough buck is to be installed.
a measure of a product’s energy efficiency, or how a material resists hear transfer or flow. R-Value is used to describe the insulative properties of construction materials - the higher the R-value, the better the insulating effect.
sinking caused by compounds not capable of supporting own weight in a joint, or by application in joints larger than the compound is designed for, or by improper application.
the portion of a window which includes the glass and the framing sections which are directly attached to the glass. Normally, the moving section of a window, although sash are sometimes fixed.
a product used with a window or door, consisting of a four-sided frame surrounding mesh of wire or plastic material used to keep out insects. The screen can be fixed in place or it can be rolled side-to-side as on a sliding glass door or pass through window.
a compound used to fill and seal a joint or opening. Also the material used to seal the edges of insulated glass.
Sealed Insulated Glass
an assembly of two or more lites of glazing separated by a dehydrated gaseous space, the entire assembly being sealed to prevent passage of water vapor or gas.
a narrow fixed unit joined to one or more doors, providing a more open appearance.
a bottom horizontal member of a window or sliding door frame.
single-hung windows are vertically operating windows in which the sash weight is offset by a counterbalancing mechanism mounted in the window. The single hung window features a stationary top and movable bottom half.
Sliding Glass Door
sliding glass doors consist of one or more lites of glass contained in panels which are contained within an overall frame designed so that one or more panels are movable in a horizontal direction. Panels shall be all sliding or some sliding and some fixed, and shall interlock with each other or contact a jamb member where the panel is capable of being securely locked.
Solar Heat Gain Coefficient
indicated the percentage of normal incident solar heat energy that makes its way through the glazing under standard summer conditions. This includes both directly transmitted and indirectly transferred heat from energy initially absorbed by the glazing. The lower the number, the better the window is blocking heat gain.
in glazing, small blocks of neoprene, nylon, or other material placed on both sides of the edges of glass to center it in the glazing channel to maintain uniform width of sealant beads and prevent excessive sealant distortion under lateral loading.
a secondary door, installed on the outside of an entrance door, to reduce air infiltration, thereby saving energy.
a window installed above another window or door.
the rate of heat flow through material, U-value is used to measure heat loss or gain due to differences between indoor and outdoor air temperatures. The lower the U-value, the better the glazing resists heat transfer.
Ultraviolet Light (UV)
invisible rays of solar radiation at the short-wavelength violet end of the spectrum. UV rays can cause fading of paint finished carpets and fabrics, as well as deterioration of some materials.
Polyvinylchloride (PVC) material that can be both rigid or flexible, used in glazing channels and weathering of both windows and doors.
holds glass in place with extruded vinyl channels or roll-in type application.
insulating spacers used to seal panes of glass in the manufacture of IGUs - edge conductivity is lessened for improved window energy performance and reduced condensation problems.
thin sections of material used to prevent air leakage around operable windows and doors - usually foam gasketing, metal strips, or vinyl.
an opening at the sill of a window or door through which moisture may drain free to the building exterior.